HY50 Series Incremental Rotary Encoder Outer diameter Φ50mm Solid Shaft Φ6/8mm Max Speed 6000RPM

1. Features and advantages:
a). Outer diameter Φ50.
b). Shaft Φ6/8mm.

c). Cable outgoing, 2 meters length.
d). Output Frequency MAX 300 KHz.
e). Max Speed :6000 RPM
f). Protection :IP54

2. Model specification:

3. Technical parameter:

Power supply	Voltage		Line drive output DC 5V ±5% or output DC 8~26V ±5%	Input and Output	Response time	≤1µs (when cable length is 2m)
	Ripple wave		≤3%rms		NPN open collector output	Negative logic (for low-level) Load current≤30mA
	Current consumption		≤120mA, DC 5V power ≤80mA		Push and pull output	Output voltage≥ power voltage - 3V DC Load current≤30mA output current ≤10mA
Output wave	Signal mode		A, B phase+Z phase (zero position)
	Max response frequency		300kHz		Voltage output	Output voltage≥power voltage - 3V DC Output current≤30mA
	Max speed		(Max frequency/resolution)x60
	Duty ratio		50±25%		Line drive output	Output voltage≥2.5V DC Load/ Output current≤20mA
	Phase difference width		25±12.5%
	Z phase signal width		100±50%		Residual voltage	≤0.5V DC
Mechanical specification	Starting torque		≤ 0.01N · m(+20℃)	Ambient specification	Short-circuit protection	Output and power supply
	Rotor inertia		0.3 × 10-6KG·m2		Ambient temperaure	-20~+85℃
	Shaft loading	Radial	25N		Store temperature	-30~+95℃
		Thrust	20N		Ambient humidity	35~85%RH (Non Condensing)
	Max revolution		6000rpm		Dielectric strength	AC 500V (50/60Hz) for 1 min
	Cable	Material	PVC		Insulation resistance	≥ 50MΩ
		Length	2m		Anti-vibration	0.75mm amplitude at 10~55Hz*2
		Diameter	Φ 5mm		Anti-impact	490m/S2 11ms*3
	Weight		About 200g		Protection	IP54

4. Appearance and installation dimensions:

5. Connections:

6. Contact:

Sales: bassy shi

Cell phone: +86 13773069136

Email: bassy.shi@youjiazhineng.com

Inquiry Cart 0